rf wireless remote rgb lights led controller

rf wireless remote rgb lights led controller 1.Touch RGB LED Controller with 6A 3 Channels. 2.certificate:CE 3.Current: 6A rf wireless remote rgb lights led controller

 *

Technical Parameters(Controller):

Working temperature: -20-60 °C

Supply voltage: 12V, 24V <optional> (for orders specify voltage)

Output: 3 channels Connectiing mode: common anode Transmission/Receiving frequency: 433.92Mhz

 External dimension of controller: L65 Χ W56 Χ H24 mm

Packing size:L120 Χ W70 Χ H50 mm

Static power consumption: < Output current: <6A (each channel)

Output power: 12V: <216W, 24V: <432W

  * Direction for use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2. Adopt RF control,there are five buttons altogether, and every key-press function is as follows:

 Key 1: on/off

 Key 2: light changing mode(15 modes)

 Key 3: color light/white light switching mode

 Key 4: turn up(brightness/speed)

3. How to use 1). Press Key 1 to turn on/off in any state. 2). Press Key 2 to activate light changing mode, a new mode each press,15 modes in total. 3). Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness b by pressing Key 4/Key 5 or changing light color by touching the color ring. 4). Resume fuction. The previous settings will be resumed while power on again. 5). Matching mode Press Key 4 once within 3 seconds when power on controller again,the light will blink 3 times if matching is successful. 6), Dismatching mode Press Key 4 five times within 3 seconds when power on controller again,the light will blink 6 times if clearing is successful.

3. Standard color changes as follows:

Feature chart for Key 2
1	Auto color changing	8 grades of brightness to adjust by pressing   Key 4 or Key 5.
2	three colors jumps to change	8 grades of speed to adjust by pressing Key 4 or   Key 5	9	Gree color jumps to change	8 grades of brightness to adjust by pressing Key   4 or Key 5.
3	seven colors jumps to change		10	Yellow color jumps to change
4	three colors jumps to gradual   change		11	Cyan color jumps to change
5	seven colors jumps to gradual   change		12	white color jumps to change
6	red color jumps to change	8 grades of brightness to adjust by pressing Key   4 or Key 5.	13	Red/blue light twinkles   alternately	8 grades of speed to adjust by pressing Key 4 or   Key 5.
7	Blue color jumps to change		14	Green/blue light twinkles   alternately
8	Purple color jumps to change		15	Red/green light twinkles   alternately

rf wireless remote rgb lights led controller