waterproof rgb led strip remote control

waterproof rgb led strip remote control 1.Voltage: 12-24V 2.certificate:CE 3. Touch RGB LED Controller with 6A 3 Channels waterproof rgb led strip remote control

Dimension: 114mm*56mm*22mm

DC12-30V input

controlling channel: 4 channel, with R, G, B ,W,

Max current output each channel:1000ma

max voltage output:26V

RF receiving frequency:433.92mhz

the five keys' function

Technical Parameters(remote control)

1:Power supply: AAA battery * 3pcs

2:Cover Material ABS

3: Fabrication processing: multicolour printing & UV varnish

Technical Parameters(controller)Working voltage:DC12VOutput control: 3 circuits(R/G/B)Control current 6A/circuitConnecting mathod: common anodeDimension: L58*W70*H28Receiving range:20metersFunctions of KeysKey 1: on/offKey 2: light changing mode(15 modes)Key 3:color light/white light switching modeKey 4: turn up(brightness/speed)Key 5: turn down(brightness/speed)

* Direction for use 1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power; 2. Adopt RF control,there are five buttons altogether, and every key-press function is as follows: Key 1: on/off Key 2: light changing mode(15 modes) Key 3: color light/white light switching mode Key 4: turn up(brightness/speed)

Key 5: turn down(brightness/speed)

3. How to use 1). Press Key 1 to turn on/off in any state. 2). Press Key 2 to activate light changing mode, a new mode each press,15 modes in total. 3). Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness b by pressing Key 4/Key 5 or changing light color by touching the color ring. 4). Resume fuction. The previous settings will be resumed while power on again. 5). Matching mode Press Key 4 once within 3 seconds when power on controller again,the light will blink 3 times if matching is successful. 6), Dismatching mode Press Key 4 five times within 3 seconds when power on controller again,the light will blink 6 times if clearing is successful.

1	Auto color changing	8 grades of brightness to adjust by pressing   Key 4 or Key 5.
2	three colors jumps to change	8 grades of speed to adjust by pressing Key 4 or   Key 5	9	Gree color jumps to change	8 grades of brightness to adjust by pressing Key   4 or Key 5.
3	seven colors jumps to change		10	Yellow color jumps to change
4	three colors jumps to gradual   change		11	Cyan color jumps to change
5	seven colors jumps to gradual   change		12	white color jumps to change
6	red color jumps to change	8 grades of brightness to adjust by pressing Key   4 or Key 5.	13	Red/blue light twinkles   alternately	8 grades of speed to adjust by pressing Key 4 or   Key 5.
7	Blue color jumps to change		14	Green/blue light twinkles   alternately
8	Purple color jumps to change		15	Red/green light twinkles   alternately

* Caution: Please don’t touch or press the color ring while loading the battaries to ptrotec the sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.

* Direction for use

Please don’t touch or press the color ring while loading the battaries to ptrotec the sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.

                     

waterproof rgb led strip remote control